Mercury TV-220A restoration

[bandersen]

I replaced a few more out of spec resistors, reinstalled the tuner and twiddled with the controls a bit more.
Picture is better, but still not quite happy. I'm getting sound at two points - very noticeable when tuning the FM band.

So I figure I'll go through the alignment procedure. It looks pretty standard with a 21.25 MHz sound and 25.75 MHz video IF.


I managed to install a NOS cord by heating it up and mushing the ears over the rivets.
I don't have many of this type cord left. They used to be so common - never figured the supply would dry up


Also getting ready to recoat the CRT with some Slip Plate.