Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 09-15-2015, 10:09 AM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
I've done this numerous times. But there's a caveat. It's always been on the standard layout with the damper in series with the B+ line going to the flyback.
I never did it on a pre-standardization layout where the damper is not in series. Your porthole is probably pre-standardization, so it might not work. Probably wouldn't hurt to try, though.

Try a disc cap of around 47pf - 82pf @4KV.

A quick check of the schematic will tell if it's a series layout or not.

(EDIT.) Have you checked the G2 (screengrid) voltage on the H out tube? If it's low it'll cause reduced width and HV.

Last edited by old_coot88; 09-15-2015 at 10:17 AM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.