Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 12-07-2014, 03:36 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
The IF is the intermediate frequency section of the receiver, whereby the carrier signals sent out by the transmitting station (or other analog RF source) are demodulated, mixed, and converted into baseband signals which the rest of the TV's circuitry can work with. For instance, an NTSC signal is 6MHz wide, per VHF or UHF channel. In that allocated bandwidth lies the color subcarrier which is extracted from the station carrier, along with the sync pulses, sound, and actual video information.

What I was suggesting in my earlier post is to attempt an alignment of the Sound IF section, which sometimes contains adjustable coil for the trap or an additional discriminator coil.

To perform this procedure, you typically require some test gear, consisting of an sweep/marker-generator, a suitable oscilloscope (dual-trace is preferred), and the original documentation specific to your set. It really does help, IMO, to have the original documents, since they often outline the exact curves you are seeking to replicate, and a bunch of other test data.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.