![]() |
|
#34
|
||||
|
||||
|
In my opinion, if you want this set to last a long time, and remain functional, you should
not replace any capacitors unless you have tracked down a problem directly to one. I went through a number of parts changes on this set in an attempt to get a better picture, I also changed video amplifier transistors, caps, and a few in the color circuits.... Parts that with tv repair knowledge I thought might be effecting picture quality, I did not get any improvement, my tv looked just like yours does.... It's kinda like some portacolor sets, there just gunna get so good and that's it.... It is kinda a shame, they did a really nice job designing it, it's well laid out, nice circuitry, etc. Maybe it needs more of a going through on the video amplifier circuits than I did, but I would hate to see you waste a lot of time, money, and possibly even install lower quality replacement parts than are in it now, and get a less reliable, and possibly poorer performing tv than you have now.... The best thing you could do in the way of improving picture quality would be to test the video amplifier for it's frequency response using equipment you most likely do not own... I have wondered if the video amp circuit had poor response, or if its some place else.... .
__________________
Yes you can call me "Squirrel boy" |
|
|