![]() |
|
#7
|
||||
|
||||
|
I got a copy of that Sams and dug up a yoke from an RCA KCS-47 chassis using a 16GP4. That has a 70 degree deflection angle just like the 16" CRT in this Capehart.
Even better, it has a 56 and 270pF cap inside just as shown on the schematic. ![]() Best of all it fits. Here's a dry run with a 16KP4. I think I'll use a little 8XP4 bench CRT during the restoration. ![]() I then proceeded to test the flyback, focus coil, vertical output transformer, etc. It all checks out - even the huge candohm resistors Finally, I pulled the 5U4 and fired it up. All the tubes lit and I have about 5 volts on the 5U4 filament and ~700 on the plates. So it's full steam ahead on this project
|
|
|