Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 03-27-2005, 05:43 PM
zacster
Guest
 
Posts: n/a
I picked up the set today, and was lucky to have a neighbor help get this thing in my house. It is BIG and HEAVY. I spent the rest of the afternoon with my wife moving furniture around to find a spot for it, which we never really did. Ultimately we decided it was too big for any place we had, but when I opened the doors we agreed that it didn't look quite as imposing with the screen showing as it did as a big box.

As Frank suggested, it is an RA112 chassis and the picture tube was also marked RA112, but I don't doubt that the 19AP4 number is correct as well. I spent so much time moving furniture that I don't even want to move this out again to see.

The cabinet is in near perfect condition, and I hope the picture tube is too, but only time will tell.

A question for all of you. Is there a way to check the picture tube without going through the trouble and expense of fixing up the rest of the electronics first? And besides the caps, which can be a problem, and of course bad tubes (I can get almost any tube), what else will be a weak point. Wiring? Trannies? Resistors?
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.