Quote:
Originally Posted by bandersen
I think this Micamold cap is 0.001 mfd @ 500v and the white dot indicates it's really paper inside so I'm going to replace it.
|
Oops, I didn't replace that cap in mine, I thought it was a silver mica. I'll make a note to replace it the next time I pull the chassis.
I also chose not to pigtail the HV caps. Getting the solder to pool just right in the cups was a bit of challenge, though. I found it best to orient the chassis so that the solder cup I was working on was horizontal, otherwise gravity causes too much of the solder to spill out.
Looks like you're getting close to the first power-up.
11-13-2013, 12:23 PM
Threaded Mode