Zenith porthole 24G26 no vertical

[kramden66]

i might replace the resistors , the arc i thought was at the tube socket , well whats happening is theres an arc at the rim of the crt where its held down to the chassis and when it arcs there it arcs at the same time at the tube socket , now if it were just the tube rim why would it cause it to happen at the rim of the crt ? must be the reverse it happens at the rim and causes it to occur at the socket ? , i will take off the part thats supposed to insulate the rim from the chassis and clean it , perhaps even the doorknob is at fault causing the issue.

mike