|
|
|
#33
03-08-2013, 11:23 PM
|
|||
|
|||
|
I put a 3.3k power resistor in series with the existing 12k, put it all back and touched up the eff coil again, now its about 187ma had to switch to the strong HOtube as the weak one resulted in too narrow a sweep (and about 165ma).
I have to double check the HV and make sure it regulating, the color seemed a bit off and the pic was not as good. I suspect my HV is down. If so I will undo the screen resistor change and check again. 
|
|
|
Threaded Mode