|
|
|
#21
05-02-2012, 05:49 PM
|
||||
|
||||
|
Somebody near you has got to have a degaussing coil. You can degauss your set and then see if it's still got the green blotches. If it doesen't, then you can replace a couple of parts on the degauss circuitry and get that working.
Most sets I've been around would make a HUMMMMMMMMMmmmmmmm sound when I turned it on after being off for an hour or more, that fades away really fast as the tubes warm up. If you turn it on when its cold, listen close and see if you get the hum that fades. I wouldn't adjust anything until you know the purity is OK, and the first thing is the magnetism issue. Best of luck to you. A schematic is your friend. Last edited by holmesuser01; 05-02-2012 at 05:54 PM. 
|
|
|
Threaded Mode