Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 04-22-2012, 09:49 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Ceramic caps are fine for RF bypass duty, you see them in tuners, IF strips and sound IFs. They rarely go bad, so you shouldn't need to replace those. You usually avoid using ceramic caps in any tuned circuit (though some specially made ceramic caps, made to not drift much over temperature, are found in RF circuits, they are usually 5 to 100pF range). And avoid using ceramic caps in RC oscillators, like vertical osc circuits. Or horizontal oscilators, where the cap is part of the timing circuit.

Audiophiles avoid ceramic caps in audio amplifiers for hifi work, but if the amp in question is the usual 1 watt tube driving a 4 inch speaker in the side of the TV cabinet, ceramics will work well enough
__________________
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:20 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.