Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-21-2012, 11:43 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
I wrote a bit about this earlier. It is indeed caused by cheap modulators. You mentioned the line shifts with the adjustment of the horizontal hold control. The line is caused by ringing in the video chain and the falling edge of horizontal sync overshoot or color burst during horizontal retrace will show up as faint line(s).

A cure is to repair if included, modify or add a horizontal retrace blanking circuit. This would involve coupling a pulse from the horizontal flyback to the video path to the CRT. Often you will find the vertical retrace blanking is included: adding horizontal retrace blanking is somewhat similar.

Another solution as suggested is to get a better modulator or modify the video going to it to minimize the overshoots. Broadcasters years ago were very careful to ensure their video did not cause this problem. With modern sets, less attention is paid to the video because newer sets blank the CRT during horizontal retrace!
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:46 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.