|
16" Zenith roundie
Just picked up a 16" Zenith Roundie and would appreciate some feedback on how to get the chassis out of the cabinet. Is it possible to slide the chassis out while the CRT remains in place? I took off the Ion trap and I can see that if I took off the spring wire that's joining the chassis to the CRT metal frame it might be possible to just slide off the focus coil with the chassis. The CRT cap was Knocked off at some point but all five leads are still intact. Just don't want to take any chances of further damage at this point. This is a two chassis set. I've already taken out the lower unit. 24H20 &24H21 Chassis.
thanks
Last edited by charokeeroad; 12-31-2011 at 05:29 PM.
|
12-31-2011, 05:07 PM
Threaded Mode