Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 11-21-2011, 05:06 PM
Komet's Avatar
Komet Komet is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Varese (Italy)
Posts: 199
Many of my sets working with all or 80% of the original capacitors.

However, this is the adventure of today... The vertical is open at 90%, so I decide to connect a DVD and a VHF modulator... Weeee, a picture!!

Suddendly, the EHT expired
After 2 second the flyback starting to frying

Immediatly I cut off the power.
I can't tell you my thoughts in that moments

I have checked 2 capacitor connected at cathode of the damper and at the cathode of the horizontal output tube (all good). Also I checked the cathode resistor of this tube, results 60 ohm instead 33...

During the last startup of my Westy I seeing a little lightning in the 6W4. That tube is italian, made by Fivre

I replaced for testing with a 6AX4, and now I have EHT. My flyback (and my heart) are saved

I have a question: what is the good level of cathode current for my set?

Last edited by Komet; 11-21-2011 at 06:35 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.