![]() |
|
#4
|
||||
|
||||
|
Congradulations!
That set seems to have a very good picture. Using a drill is not a good way to go on lytic rebuilding. A good way is to pry up the lip of the can, pry out the treminal wafers, and use a cork screw to pull the rest of the guts out. I know the last part sounds wierd, and takes a some arm strength to do, but it works quite well.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
|