Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 10-25-2011, 09:48 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
one last thing, depending on the set, you may be able to just connect the composite video directly to were the video detector diode out is. there should be a test point there (used for scoping the video out for test purposes).

this will give you a pic, you would also need to connect the audio to the correct place (on the audio pot). this bypasses the tuner and IF completly.

the only issue may be the the direction and power of the composite video.

if its too weak you may get a weak snowy pic, and if its reversed from what the tv wants you get a negative pic.

Before trying it I would check the voltage at the test point (to ground) just to make sure its at 0 potential, it prob is, but would not hurt to check before putting the composite video there.

I just checked my philco, it looks like you want test point B and it 1.5v pp which may be more than what your DVD comp video puts out (think they are about .5v pp IIRC).

the test point is on the sweep/sound board at looking at the 6MG8 chroma amp/video cathode follower sync amp tube, right by the tube at the 4 o:clock posistion, near the side of the board.


this is where a nice adjustable video amp (with a phase invert option) would come in handy.
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.