![]() |
|
#30
|
|||
|
|||
|
Hokay. Now it makes a lot more sense. What threw me was the 6L6 being designated "oscillator". So i hadn't bothered to eyeball further back into that H.sync subchassis. Turns out it actually uses a pretty decent phase comparator circuit, rather than "direct injection" of sync into the 6L6 as i first thought.
But still wondering how the flyback is kept from ringing without a damper.From the FWIW department, here's a few thoughts pertaining to the HV.. The three 680K 1W resistors in series sure look to be a post hoc engineering fudgery to limit the HV. As mentioned before, they form the lower leg of a voltage divider. The capacitive reactance of the 500pf 10KV cap forms the uppermost "resistor" of the string. If t'were me, i would open the lower string and insert a fourth resistor and experiment with its value, starting with 680K 1W. Finally, if it looks to be warranted, maybe open the string entirely and see what the HV does. If the HV still seems a little "soft" (bloomy), i would first try a 680K 1W across the aforementioned cap and then experiment with values, to see if it'll stiffen the supply up (ie., give it better regulation, making the pic less bloomy). And those four 20 meg resistors in series, totaling 80 meg, serve no obvious function other than to bleed the charge off the CRT when the set is turned off. They could be dispensed with altogether (IMHO), as most sets never used a bleeder at all on the CRT anode. oc |
| Audiokarma |
|
|