![]() |
|
#17
|
||||
|
||||
|
I had trouble with wrong voltages and currents in the horizontal unit too. Read
http://audiokarma.org/forums/showthr...t=30364&page=5 and the following postings. I have renewed all the resistors on the horizontal oscilltor board. Some of these old resistors are crumbly. After renewing I got the correct values. But be careful with soldering. I had a short between grid and screen of the 6CB5 with fatal consequences. Check R603 too. In my manual it has 150K, not 100K like in yours. In the set I found 90K and changed it with 150K. BTW: Is A.G.C. ok? The first anode of the 6U8 should have -30 thru -70 volts. (Without signal input 0 volts). |
|
|