Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 03-01-2011, 04:14 PM
CurtisMathes CurtisMathes is offline
VideoKarma Member
 
Join Date: Jan 2011
Posts: 31
Quote:
Originally Posted by wa2ise View Post
Back in around 1960 my father acquired a bare TV set (chassis with CRT, but no cabinet) that looked an awful lot like yours. The channel knob looks the same as I remember, as well as the rectifier tube atop the power transformer. This chassis had no audio amplifier, so my father ran a cable from the sound detector to his pair of monoblock audio amps. Which in turn drove some big speakers we had in the living room, which the TV chassis sat atop one of. Only thing was that the sound came out of the other of the stereo speaker pair, sitting about 8 feet away from the TV. As TV was in mono he only fired up one of the monoblocks, and we never bothered or get around to swapping the speaker/amp connections to make the TV sound come out in the speaker just under the TV...

It's long gone, as well as any schematics too...
Rod Stewart was right. Every picture does tell a story.
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.