Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #16  
Old 11-29-2010, 06:41 PM
polyphase polyphase is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: New York
Posts: 42
Well, Im glad you found a fix, IMHO it would have been a shame to put a SS module in this iconic set. To me, the symptoms you describe had the earmarks of capacitor failure, not inductor. Im sure you have checked these but IMO might be worth checking again. One possible culprit might be C71, the 4.7pf between plate and grid of the oscillator. This cap will heat up on its own due to the combination of high frequency and high voltage, and could start leaking if not fresh and rated at least 1kV. A leak here would bring down the HV in short order.

Finally, I once built a 500kV Tesla coil, so I know about this stuff..

Last edited by polyphase; 11-29-2010 at 06:49 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.