Need Help With My Solid State TV

[jr_tech]

so really you have,
1. No sound through the speaker.
2. No light at all on the screen. Do you see a flash as the set is turned off?
3. No light from the heater of the CRT. (really need to look with the back off)
4. No HV (you should be able to feel an electrostatic charge on the front surface of the CRT when the set is turned on/off) or perhaps hear a crackling noise as the CRT charges up.
4. A dead VCR.
5. No "cheater" cord/can't get the stock cord clip pried loose from the back.

Only have a hissing noise that varies with the setting of the horizontal hold control.

Is there any diagram in the set that shows the location of fuses?

And the seller said the set worked fine... any big bumps or thumps getting it home?

This is a good puzzle... hope we can solve it!
jr