I have an important question

[jeyurkon]

If your BK 465 is showing the cutoff as being good, then the base connection must be o.k.

John

Originally Posted by Bill Cahill

Thank you both very much. Your ideas and, from my friend Mr. Detrola at ARF
coincide, and, give me an excellent starting point on what to do.
As soon as possible, I ntend to impliment those ideas.
I'll let you know the results.
INterestingly, the agc switch is also having no affect, so, that shows that for some reason, the signal just plain isn't getting to the picture tube.

I have a further question...
I checked the tube on my BK 465 tester, and, it says tube is wonderful!
Would it still check good if that grid wasn't making connection?
Not sure where the tester gets its' data. Cathode, grid, or, what?
Bill Cahill