Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-08-2010, 03:59 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Teledyne/Packard-Bell "multi state" 23" color console

Here's a circa '71-'72 23" Teledyne/Packard-Bell hybrid (or, multi-state, as PB calls it) color console that is part of the load of TV's that came back with me from SC. I've done very little to this set except test it and it has a hard short somewhere in the chassis, as it trips the circuit breaker instantly. I did check the CRT and it test very strong. I tried to find an EIA code on the tube; but, couldn't make it out. Somehow, the labeling looks like an RCA tube. The cabinet is cheap particleboard and it's very plain in design. Also, this set does not have auto degaussing; rather, degaussing is done by pressing the "ICP" button on the front of the set.

Whatever is shorted in this set must be a common problem because we found at least two other PB consoles from the same era that tripped the circuit breaker shortly after turn-on. Like I said, I havent really worked on this one; but, I suspect a shorted cap or diode. I have not even checked to see what Sam's it's in. I wonder how the picture was on these models.





Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.