zentih Avanti

[DaveWM]

this is the one I picked up in tampa

did nothing to it other that a degausse.

I did put a dot and cross hatch on it, it will need some convergence toucht up, really show up on the dot, they are off pretty much all over the screen. horz bars are off the most on the far right (blue separates out, bends down on the extreme right the most).

I have the base, no cracks, gel coat is in pretty good shape. I took it off to gain access to the sevice plate and make it easier to move around.

There are several under the chassis caps, nichicons, looks like some were replaced. Not sure if I should replace or leave be.

vert is a little short so guess I could check the vert board cap. I try the adj but its near the end of the range.

Horz overscan seems to much but not sure where the adj of that is.