Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-27-2010, 07:28 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
'74 Zenith 25EC58 from SC is alive!

I dug into the '74 25EC58 solid state horizontal chassis Zenith that I brought back from SC. The "no video" problem was caused by a blown CRT filament fuse. It now works; but, still has some issues that I need to correct. First, the picture is too bright and a little washed out. At present, I have the contrast control turned all the way up and the brightness control turned only approx. 1/4 of the way up. Second, the picture is jittery, espicially for the first minute or two. After it warms up, it looks better; but, any writing on the screen still has some jitters. And, it will need the usual control cleaning and touch ups. It still has those white safety caps in the HOT circuit; so, those will be replaced with orange drops before I'm done.

The cabinet is plastic and particleboard; but, the chassis is very well built. If I had a choice, I'd rather see a well built chassis inside of a cheap cabinet instead of a top quality cabinet that housed a junk chassis.





Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.