Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-18-2010, 09:32 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
'72 15" Packard-Bell (by GE) B&W portable

This is one of the sets that came home with me from SC.

What you see is a 15" Teledyne/Packard-Bell (in name only) tube type B&W portable that's actually built by GE. It's a '72 model and uses the GE "SE" chassis. This set has "instant on"; and, as can be seen from the picture of the chassis, does not appear to have seen much use.

I don't know what it is about these GE tube type portables from this time period; but, every one of them seem to have vertical problems. And, this set is no exception. As you can see, the picture is compressed at the top and stretched at the bottom. When I turned it on this afternoon, the picture came up normally and then exhibited vertical trouble after the set had been on for a few minutes. I suspect a bad cap; but, am going to track down a Sam's before I proceed. This set is in Sam's 1217-1, which I don't have. I did check the vertical osc./output tube (23Z9) and it's good. In years past, I never really tried to repair one of these sets; but, I think I'll try to repair this one since it's in otherwise good condition.



Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:35 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.