Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 04-07-2010, 01:43 AM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Your set looks to have been a hack job, just like a Philco 46-806 I got years ago and never attempted to restore. Someone before me installed a transformer to replace a probably unobtanium ballast tube, so they could continue to run it off their 230VAC lines. They also hacked in (actually fairly neatly) an octal socket for a loctal one that held the rectifier tube. So they could use a 35Z5 instead of the loctal equivalent. Same with the audio output, now a 35L6. Loctals must have been unobtanium, or maybe someone had the octals on hand... They soldered in the octal socket chassis mounting ears to the chassis. Must have been eons ago, as the solder is well corroded gray, like the chassis. And then there was some badly done replacement electrolytic caps. Internal wiring does look to have been abused with high heat. Said power transformer had been soldered to the chassis... Think this radio came from Peru when I got it off ebay. According to http://www.philcoradio.com/gallery/1946a.htm#16 this set is similar to Philco's 42-706 and it does look to be, except for a 14J7 instead of a 7a8 for the converter. You inspired me to restore mine, should be an adventure to restore it...
__________________
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:16 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.