Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 07-24-2009, 06:09 PM
cooljjay's Avatar
cooljjay cooljjay is offline
VK Member
 
Join Date: Feb 2008
Location: vallejo, ca
Posts: 54
Quote:
Originally Posted by Tube TV View Post
Looks like someone's done some handywork in there .
Why they would bother is another story ?
all the original tubes are easy enough to get , so I don't understand what they were trying to do .
What tube is subbed in there under the chassis the 12AU7 ?
What tube is disconnected ?
This might be the same tube as a original , but the tube socket cracked , so it got wired up under there rather than drilling out the rivets and properly .
The thing that we must take into consideration is that most likely when this TV was last "repaired" it was of little value , so you can expect to see these kinds of shortcuts every so often as alot of customers only wanted to spend a few bucks on the repair or get a new set .

Might be a pretty simple fix by reconnecting the wires on to a properly mounted socket .
Don't think you got a dud just because you didn't get a picture .
Those caps are about 60 years old , alot of sets are dead like that , and come back to life with just a recap .

Does there appear to be any burned parts ? resistors , caps , wiring ect....?
The tube under the chassis is a 12BH7, it looks pretty burnt up too.
Doesn't appear that any of the tubes are disconnected or missing.
Nothing looks to be burnt just very dusty, will examine closer.
I am not thinking that, I was thinking I wouldn't get a picture because of the strange repair/add on. So I didn't even attempted to plug it in. Once the stuff is put back to original I will try to power it up.

Quote:
Originally Posted by bandersen View Post
Actually, that chassis looks to be in pretty decent shape aside from the odd tube stuck in. Also, you're missing a couple metal plates around the RF/IF amp - unless you took them off before taking the pics.

Here's an unmolested one from that link earlier in this thread.

http://brogers.addr.com/Web/TV/under...s_original.jpg
Nope they are MIA. I seen that photo, I guess what I will do is take the laptop in the other room by the tv and start putting things back to where they should be. I am thinking this stuff was added in to connect the tv to some kind of accessory or radio or something.
__________________
Jason-
Reply With Quote
Audiokarma
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.