Just got this magnavox

[DaveWM]

still checking it over, seems the voltages are all wrong but it works fine.

one really odd thing is the current reading on the B+ out of the doubler, only reading 24ma not 280ma per the schematic. No way the 24ma can be right its got a dozen tubes!

I am going to have to triple check my meter settiing on that. I have scoped a few of the check points in the problem area (vert sweep) scope patters look ok but low peak to peak. But then again the pictrue is fine so I am about ready to call it a day and leave it alone before I break something.