|
Both of my Motorolas had good high voltage... I guess I was lucky! If space is a problem, I bet it could be engineered to use a 1970s vintage solid state tripler block, which should accept the RF output from the flyback directly; replacing the whole Motorola rectifier and HV regulator. If the set is converted to a metal tube, you'd still need a 40Kv doorknob cap from the anode to ground, though. There's also a focus tap on those blocks if needed. See the schematic on a Zenith 19EC45 chassis, etc.
Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
|