Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 06-23-2009, 11:14 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
I've never seen a Sentinal set so I'm operating in a vacuum here.

I could guess at least two methods. One requires a special tuner. The other maybe.

You have four bits which could generate 16 codes and you only need 12. They could switch relays that switch in capacitors and coils. But, the code you show doesn't make sense for that.

The other possibility would be using a motor as you suggest. The shaft that the motor turns would turn a switch with a common wiper that generates the compliment of the code that you show. The wiper would be connected to the motor and the motor would turn until the switch reached the compliment value. There would be no matching on state on the two switches to power the motor.

The potentiometer could control a reactance tube for the fine tuning.


John
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.