Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-19-2009, 07:33 AM
AndrewM AndrewM is offline
VideoKarma Member
 
Join Date: Feb 2008
Location: Victoria, Australia
Posts: 121
Recent TV finds.

During a recent trip to the city I was lucky enough to drive through an area having a trash collection. Unable to resist, I spent some time driving around and managed to find a few worthy additions for my collection.

The first find was this Australian manufactured Philips model 02KJ658 (K12A chassis). Apart from a couple of missing tuner knobs and a mildly damp affected cabinet base, the set is in reasonable condition. It hasn't been tested yet due to the power cord being cut off. These K12 chassis sets are fairly unusual as they were available for only a short time and in limited models.



The chassis has the typical hard wired E/W module modification. Sharp eyed readers from Europe will see several differences between the Australian and European versions of this chassis.



The second set is really unusual find. It is a 1977 Blaupunkt Toronto (FM100 chassis). This 22" West German set has an inline CRT and has the unusual feature of having diagnostic LEDs on the chassis to provide at a glance fault finding.
This set has been stored in damp conditions for a while and the base of the set has deteriorated but is still in one piece. This set has also lost its power cord so is as yet untested.



The slot in the power supply cage is where 5 of the 9 diagnostic LEDs are located. The rest are found on the deflection (right hand) panel. The RGB drive module has been running very hot as can be seen in the picture. Half of the PCB is badly discoloured.



The last set is another Australian Philips model 02CH631 (KL9A-1 chassis). This is a remote control set with all the user controls hidden away in a drawer. This set is in working order but needs some work to improve its performance.



The upper drawer has all the user controls (channel buttons, volume and picture controls etc). The lower drawer is for channel presets.



The chassis is a common one for early 1980's Philips sets. I believe it is very similar to the European K30.



I had to pass on several more sets as I didn't have the room for them. I did salvage the chassis from a couple more Philips sets that had very rotten cabinets (K9A and a KT2A-3). I also salvaged the chassis from a now rare Australian made Kriesler from 1975 (59-1) chassis. This was a lucky find as I have a similar set missing most of its chassis.

Finally, here is a picture of one of the reasons I went into town. This pair of Philips VCR's are rebadged Sharp units from the early 1980's. The top one is a VR401 with a minimum of features. Below is a VR501 which is a more up market model.

Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.