Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 04-18-2009, 11:59 AM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Is the battery packaged inside the RAM chip, or located inside teh scope on a circuit board? If it's by itself on a circuit board, you might be able to maintain the voltage on the RAM chip with an external bench power supply (wire leads soldered temporarily running to a bench supply set to the correct voltage, with some series resistance added) before removing the old battery and after you install the new battery then disconnect the bench supply. Thus this should... keep the data in the RAM chip alive. I haven't tried this, so YMMV.
__________________
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:59 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.