|
|
|
#1
03-20-2009, 06:32 PM
|
||||
|
||||
|
Need help with RCA model D52W20 HD ready projection set
I am looking at a friends RCA HD ready 52" projection set.
 The problem is that when you push the power button, one relay clicks and the power indicator light gives three long blinks. After that it does nothing. I think the power supply is the problem but these are not the sets I usually work on, just figured I would give it a try. The set is a 2005 RCA model D52W20 with chassis ITC222. If it's bad caps or something in the power supply I shouldn't have any problems, it's all those pesky microprocessors and IC's that screw me all up. If that's the case I won't touch it with a ten foot pole. Any suggestions would be welcome. Thanks in advance. Mark
__________________
My TV page and YouTube channel Kyocera R-661, Yamaha RX-V2200 National Panasonic SA-5800 Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20 Pioneer SX-939, ER-420, SM-B201 Motorola SK77W-2Z tube console McIntosh MC2205, C26 
|
|
|
Threaded Mode