Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-14-2008, 04:01 PM
AUdubon5425's Avatar
AUdubon5425 AUdubon5425 is offline
VideoKarma Member
 
Join Date: Aug 2008
Location: Picayune, Miss.
Posts: 1,769
Q. about Silicon Rectifier

Hello everyone,

I obtained a Sams for my Magnavox U44 (http://www.audiokarma.org/forums/sho...d.php?t=187889) and dropped the chassis last night. Everything looked pretty clean except for two areas:

Someone did work to the horizontal AFC network, which is one of those all-in-one pc chips that look like a wide orange-drop cap with 5 leads (forgive me - I don't know the proper name for these.) They must have used a pretty hot iron, as heat blackened the board and cooked the insulation on a couple of wires. My question is: is there a good source for these chips, or are they made of unobtanium? Also, was there a reason other than convenience that the resistors and caps were integrated into the single chip?

Second, the silicone rectifier diode for the low voltage was replaced, and the tech thought it better to mount it on the opposite side of the chassis where it can be easily accessed. My question is: is the current placement of the rectifier in the circuit kosher, or should I move it back to where it originally was? (see image below)
Attached Images
File Type: jpg 65mag-x1.jpg (111.4 KB, 2 views)

Last edited by AUdubon5425; 04-22-2010 at 01:03 PM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.