Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 11-06-2008, 10:35 PM
JB5pro JB5pro is offline
VideoKarma Member
 
Join Date: May 2008
Posts: 616
OK... here's a brain teaser...

So, I have this CTC-15 that has the old fly gett'n too hot after 30 to 45 min of play. Too hot to me means that after such time of play I feel it and kinda can't hold my hand to it and clearly the wax would be melt'n down which upsets me terribly. So, I never watch my brand new(Hawkeye excellent rebuild) 21FJP22 original that came with the set new. Kinda depress'n. I am aware of the alignment procedure for the horiz section but have no milliammeters yet. I suspect some little cap or two is out because when I put my B&K crosshatch generator on it and procede with the horiz section alignment using my RCA Senior VoltOhmyst I cannot get proper horiz sizing from side to side. I can't make the squares on both sides all the same size. I have been thinking that if the circuits are functioning good that I should be able to make the squares all the same size and thus get the equivelant of using the milliammeters. Am I wrong or do I likely have ill caps?
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:35 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.