Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 06-28-2008, 10:29 AM
auplater's Avatar
auplater auplater is offline
"Mine goes to eleven!!"
 
Join Date: Nov 2006
Location: Ashland, KY
Posts: 3
thanx...

I do the plating myself... it's a multi step process of de-rusting (pickling) copper plating then bright nickel...

Dunno what it would cost from a commercial shop... maybe $10 - $15 each if supplied in bulk... probably with a minimum order of $100 maybe for the work?

I've started stripping the large caps and cleaning the chasis up...1st 2 cans have been d/c'd and polished.. waiting for caps to replace...


Here I've started to remove chasis rust,... I may spot plate the areas with zinc to prevent future rust.. or I may mask the non-chasis components and spray with krylon nickel... dunno yet.


Here I've made new rubber bushings for the chasis mounts to the cabinet, from a sandpaper eraser/cleaner... they're about the same durometer and work great

John L.
__________________
Remember the Golden Rule: Them with the gold make the rules
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:57 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.