Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 06-19-2008, 12:36 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by jpdylon View Post
Had to replace main power supply filter. a fuesable resistor in the horizontal driver circuit had opened. Some coupling caps in the sweep section were leaky, Replaced a defective screen grid control and the High Voltage Trippler was replaced.

Afterwards a complete grayscale and convergence setup, cleaned the tuner, resoldered the tuner power supply board (a must on the varactor tuners) and finally.....


Sit back and enjoy! Total time on this set was about 3 hours and 60 bucks in parts.
One can't have too many CCII's on hand. I have 3: 25EC58 flat chassis, 19HC48, 19KC45. I'm on the lookout for more.

I'm sure the tripler was your biggest expense. Was your old one bad or did you just replace it as a precaution? I've ran into several of these sets where the tripler would short and take the flyback and HOT with it.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:20 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.