Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 02-05-2008, 11:06 AM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Quote:
Originally Posted by radiotvnut View Post
Check for a shorted horizontal output transistor. Also check the two transistors mounted on heat sinks in the power supply for shorts. If they are shorted, there will be a small round white resistor less than 1 ohm that will be open. Also, resolder the connections on the horizontal drive transformer. The loose connections are what takes out the HOT and in turn blows up the power supply transistors.
My suggestion exactly. A note on the resistor: It IS THE B+ FUSE. You must replace it with an exact equivalent, or the set will blow to oblivion if the short that caused it isn't fixed. That resistor is R607, near the edge of the board where the 2 heatsink-mounted regulators transistors are (2SC4834MN). Technically, you should replace the thermistors too; VDR601,602, & 603. However, many people don't.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.