|
|
|
#31
12-17-2007, 07:11 PM
|
|||
|
|||
|
Like I said before: Don't give up.
Bad caps alone won't cause the horizontal to fail to my knowledge. it's usually a bad cap that makes whatever controls the horizontal fail. You're also lucky to actually have access to a FREE service manual. Most times you don't get that lucky. If you're getting frustrated, stop working on the monitor for a day or two. If you can find replacements, it wouldn't hurt to replace Q901 and Q902. Replacing them won't hurt anything as long as they're replaced with the same part, and at the very least, you can rule them out. 
|
|
|
Threaded Mode