Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 11-22-2007, 01:27 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Have you got a model or chassis number. Should be on a piece of paper located on the rear cover. I'm not familiar with RCA's newer bigscreens; but, their direct view sets of this era are known for having bad flyback's. You'll probably have to obtain service information on this set to determine what value the resistor is. Then, you'll have to find out what drew too much current and burned the resistor. You may try tracing the foil on the underside of the board to see what the resistor connects to. You may possibly have some type of solid state device (IC, transistor, diode, etc.) that has shorted. And, it could have very well have been the flyback that went bad. Like I said, they are high failure parts in the direct view sets.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.