![]() |
|
#7
|
|||
|
|||
|
When electrolytics dry out, their resistance goes up. An ESR meter measures the internal series resistance of the cap.
It only applies a small AC voltage, so it won't tell you if the cap is leaky. The main thing it does is tell you if the cap can still work well as a filter. This is particularly useful when looking for the cause of hum bars, or vertical problems. The biggest risk on a TV that hasn't been used for a long time is that a cap will be leaky, shorted, or needs to be re-formed. Caps that haven't been used for a long time can temporarily become leaky. Suddenly applying full voltage can cause them to over heat and fail. If you gently charge them over several minutes to several hours (re-forming), they may be ok. In a typical 60's TV I usually find a few caps with high ESR that must be replaced. The rest of the caps are usually ok, even without soft starting to re-form them. High ESR caps usually won't hurt anything except with switching power supplies. I don't like to run solid state TVs for long on low voltage. It can actually stress parts. The safest option is to simply replace all the electrolytics before you even plug it in. I usually just stick with as many original electrolytics as I can (knowing that I will probably have to replace some of them eventually). |
|
|