|
|
|
#1
01-28-2007, 07:16 PM
|
||||
|
||||
|
Help from those who have a CTC-19
Im trying to get my ctc19 going right. CRT tests strong, but need the kine bias switch all the way to max and the G2 controls all the way up to get a decent picture. HV is ok. The first thing to check is B-Boosted boost voltage, supposed to be 1080 volts. I read about 730 volts. If I disconnect the B boosted boost lead to the vertical linearity pot, I get about 880 volts. If I completely disconnect the screen controls along with the vertical linearity pot, I read about 1066 volts which is good. As of now, I cannot find out what could be loading it down. Any ideas appriciated.
Those of you who have properly working CTC19's can you please check your B boosted boost voltage and let me know what you have? Thanks
__________________
I tolerate the present by living in the past... To see drh4683's photo page, click here To see drh4683's youtube page, click here 
|
|
|
Threaded Mode