![]() |
|
#24
|
|||||||
|
|||||||
|
Quote:
Quote:
As far as programming, Baofeng apparently has a habit of using confusing/obfuscated firmware and not documenting changes; so programs like CHIRP sometimes won't work with it. Combine this with the fact that Baofeng doesn't have software for all the radios. It's like they don't have GT-3TP software; at all; no Baofeng distributor lists it...that's because it's actually made for Sainsonic by Baofeng. The disc that came with it didn't seem to have the right software for it; which I found from youtube that the UV5R software will work for SOME stuff; you can program the frequency ranges; in fact about the only feature that doesn't work with the UV-5R software is the memory power output; as the software only has "lo/high" and doesn't know about lo/hi/medium. As I said, mine wasn't opened for the US 70cm band all the way; so I had to go in and change the frequencies. On the VHF side; you can set the range you want; but you can't lock out transmit...so it's entirely too easy to go outside the 2m band and transmit. On the UHF side, you can lock out transmit above 480mhz; but that's it. So it was easy to go down in to FRS/GMRS and get on those frequencies. Mine came with a disc; but the only useful thing on that disc was the Win7 driver for the USB cable (it's a usb-serial bridge); and I could have pulled the UV7 software off it. However, the instructions I found said to use the UV5R software, as it was 64-bit and would program most of the radio without issue. I did get Chirp working using the BF-F8HP driver; and I thnink the BF-F8HP is basically a slightly different GT3-TP (both are 8 watts and have the same features). Quote:
I will admit, I did slightly break some regulation by testing the radio on an FRS channel using 1 watt of power in to a dummy-load to minimize any kind of stray emission; I only did this because I wanted to make sure the radio itself was fully functional within my return period. I also did it at around 2am when the possibility of anyone on FRS or GMRS would be nil..and did in fact listen for a good half hour to make sure no one was on it. But, again, it was 2am; I probably made a total of 10 seconds of emission at low power in to a resistor; even the FRS walkie-talkie couldn't pick it up across the room. Quote:
Quote:
I don't completely agree with the "you're not supposed to transmit so let's just block that programming feature right now"...because things just don't work that way. If it did; it wouldn't be legal for me to own the radio rigs I do since I'm not licensed...but it's only illegal for me to transmit...no law against reception or owning it. It's up to the indvidual as to if they comply with the law or not. As it is, I love the fact I've got extended VHF range...I can punch up and hear NOAA...yes, you have to be careful not to key it up. The procedure isn't even secret or anything; it's right in the software. The instructions only tell you how to get through that lousy chinese software. You click on this "other" screen and it's right there, plain as day. They did this because of the fact it'd be too difficult to keep the radio's organized by area. That's the biggest issue with the Baofeng software; it's largely Chinese and, as I mentioned...there are a lot of radios to which they don't make software for. It does have some idiotsynchries that make it a bit difficult to use. I don't know if all the HT's ship with cables; I've seen some that don't and some that do. The seller I got mine from had packages with the cable and without. Quote:
CHIRP is great, but it's iffy on the Baofengs. Sometimes they work; sometimes they don't. Part of the problem is they're not well documented..and models don't always work. Chirp doesn't support the "GT3-TP"...but it does the very similar BF-F8HP. Even with the Baofeng software I had to use a model not for my radio. Quote:
According to my manual; the radio has two emission modes: 16KΦF3E and 11KΦF3E, the maximum deviation is pre-set to 5khz for wide and 2.5khz for narrow. There's probably quotes I intended to respond to...but didn't. Either way, I think I'm gonna be pretty happy with this radio; even more so when I start buying more antennas to stick on it (mine shipped with the Sainsonic INF-641). It's not the end-all to end-all; I know that. Still, for what I paid it feels like a very solidly built radio. I will probably upgrade/replace it in a year; but it'll likely still be around as that "cheap beater" I carry around that I care less about if it gets broken. I do now have a Kenwood TR-7950 with KPS-12 power supply sittin in the shack as well as a TR-7400a that's supposed to be on the way. Now I get to put antennas on my car!
__________________
Audio: SMSL M8 -> Little Bear P5 -> Sansui SE8 -> Yaqin MS-12B -> Denon PMA-770 -> Ohm Model L | Ham: NQ4T - IC-7300 [/SIZE][/COLOR] Last edited by dewdude; 03-16-2015 at 03:36 PM. |
| Thread Tools | |
| Display Modes | |
|
|