|
|
|
#1
09-11-2019, 12:40 AM
|
||||
|
||||
|
What does a CTC30's remote look like?
I have a friend who has the abovementioned RCA tv, and would like to get it going. Alas, no remote.
|
|
#2
09-11-2019, 09:05 AM
|
||||
|
||||
|
Most everything in the ultrasonic remote days would work without the remote. So it could be fixed and used as a non-remote set while waiting for the remote to show up...if everything is serviced properly the set will either work fine with the remote when it shows up, or only need a few adjustments of the remote receiver chassis.
Also there weren't that many sound frequencies used so a common 4 function Zenith remote or a higher button count ultrasonic should work some or all of the functions.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
|
|
#3
09-11-2019, 10:25 AM
|
||||
|
||||
|
The RCA number for the transmitter is CRK10A, part number 10T111. It's an eight button ultrasonic unit that was also used with the CTC28 chassis. They show up on E-Bay quite often. Make sure your friend has a remote set. The CTC30 has power tuning, but not all chassis were equipped for remote control. The remote set model numbers all ended with "R", and the on-off on the volume control was turn on-off rather than push-pull on-off for the non-remote sets.
|
|
#4
09-11-2019, 03:23 PM
|
||||
|
||||
|
Has the channel change chrome bar on top. Not sure about the remote now
|
 |
|
|
Linear Mode
