|
|
|
#1
07-28-2013, 02:04 PM
|
|||
|
|||
|
Tension banding for implosion protection
http://www.google.com/patents?id=S9x...page&q&f=false
Think this is the correct patent we should review, Step 65 addresses the actual tension in pounds. I would like to keep this on topic please, so those that have actual experience with tension banding retangular CRTs please comment with types of equipment used, and any practical advise on this method. As CRT's become more scarce I can see how removing bonded lens (due to bonding agent breaking down) and alternate safety measure may become more of an issue. 
|
|
#2
07-28-2013, 03:53 PM
|
|||
|
|||
|
I think this is called a pusher style strapping tool
http://www.youtube.com/watch?v=YFE86mB_kNI here is another type http://www.youtube.com/watch?v=FyLlVS90LhM trying to find something that does not require banging on the seal to tighten it up.
|
|
#3
07-28-2013, 03:59 PM
|
|||
|
|||
|
I take it that the type wanted would be the "round or flat" tension tools so the tool does not fit under the strap (again pusher config). This is all new stuff so I may be all wrong. So again I am appealing to those that have actually done this on CRT's for some guidance.
another site that sell tools http://www.jemline.com/prod/manualse...alsealers.html
|
 |
|
|
Linear Mode
