Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-21-2012, 05:17 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Mid '60's 23" RCA B&W TV with cart

Here's a circa '64-'65 RCA 23" B&W TV, in a metal cabinet, with it's original roll around cart (that needs some help) that I picked up. This uses a KCS136 chassis, has the original owner's manual and schematic, and looks to be a decent chassis. I've always liked these large screen metal cabinet B&W TV's.




Reply With Quote
  #2  
Old 09-21-2012, 10:05 PM
bgadow's Avatar
bgadow bgadow is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: Federalsburg, MD
Posts: 5,865
I had one as a Lyceum, plain gray metal cabinet, came from a local school system. I was too dumb back then to fix it (just had a sync issue). There is something about your set that I like; cleaned up a bit, this will be very sharp looking.
__________________
Bryan
Reply With Quote
  #3  
Old 09-21-2012, 10:32 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
I like the large screen B/W sets too, I have a 23" Zenith from '66 on a cart that looks a lot like your set. Nice find Bryan!
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
Reply With Quote
  #4  
Old 05-15-2013, 12:44 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I finally pulled this set out the other night and noticed that the power switch was dangling loose inside the set. I jumped the switch, applied power; and, it came to life with no vertical deflection. I wiggled the vertical output tube and got sweep back; but, vertical deflection is still off. I also noticed that the vertical and horizontal sync is off at turn on and has to be adjusted each time the set is turned on. The good news is that the CRT is strong and the only problem areas appear to be in the sync circuits and vertical output stage. Once I get the picture locked; the TV presents a sharp picture with plenty of range in the brightness and contrast controls. I'm sure this set will be fine with some new capacitors, some resoldering, and cleaning of the tube sockets and controls. Everyone who I've talked to who remembers this chassis tells me that it was one of RCA's better B&W sets.
Reply With Quote
  #5  
Old 05-15-2013, 07:57 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
Nice looking set. looks very east to work on as well. Hope you do a youtube of it.
Reply With Quote
Audiokarma
  #6  
Old 05-15-2013, 08:21 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by radiotvnut View Post
I finally pulled this set out the other night and noticed that the power switch was dangling loose inside the set. I jumped the switch, applied power; and, it came to life with no vertical deflection. I wiggled the vertical output tube and got sweep back; but, vertical deflection is still off. I also noticed that the vertical and horizontal sync is off at turn on and has to be adjusted each time the set is turned on. The good news is that the CRT is strong and the only problem areas appear to be in the sync circuits and vertical output stage. Once I get the picture locked; the TV presents a sharp picture with plenty of range in the brightness and contrast controls. I'm sure this set will be fine with some new capacitors, some resoldering, and cleaning of the tube sockets and controls. Everyone who I've talked to who remembers this chassis tells me that it was one of RCA's better B&W sets.
The power switch looks like the ones I used. It can be reattached. I used to spot-solder them, so that wouldn't happen.
RCA built that same chassis for a few years, with a few variations. The earlier models had a different power transformer and 5U4 rectifier. The last models used all novar tubes, instead of some octals.
Yours is probably the next to the last model.
Reply With Quote
  #7  
Old 05-15-2013, 08:33 AM
Kamakiri's Avatar
Kamakiri Kamakiri is offline
Administrator
 
Join Date: Jun 2002
Location: Buffalo, New York
Posts: 5,109
Large screen black and whites are getting more and more rare to find....
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia."
Reply With Quote
  #8  
Old 05-15-2013, 09:24 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
my large screen B&W sets from the 60's have the short neck CRT's, maybe its just me but I think I like these large neck sets better.
Reply With Quote
  #9  
Old 05-15-2013, 12:10 PM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 847
The KCS165 is very similar. I have a 19 inch portable(?). It does have a handle. Mine needed a number of resistors in the horizontal and vertical stage. I also had to replace the deflection yoke. It is a great set!
This chassis family has an exceptionally sharp picture.
Reply With Quote
  #10  
Old 05-15-2013, 01:23 PM
truetone36's Avatar
truetone36 truetone36 is offline
electronics packrat
 
Join Date: Jan 2006
Location: Trumann, AR.
Posts: 942
I need both channel selector knobs for one of these.
__________________
Dumont-First with the finest in television.
Reply With Quote
Audiokarma
  #11  
Old 05-15-2013, 07:53 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
I may be able to help with those knobs, I'll let you know if I find them.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
Reply With Quote
  #12  
Old 05-15-2013, 08:14 PM
Sandy G's Avatar
Sandy G Sandy G is offline
Spiteful Old Cuss
 
Join Date: May 2003
Location: Rogersville, Tennessee
Posts: 9,571
That is a Double-First Cousin to the TVs they installed in my Elementary School about 1967-68. I remember taking butt rolls of paper over to them-36" wide X 1000' or so, back in the Eighties, & those old War Horses were STILL there..
__________________
Benevolent Despot
Reply With Quote
  #13  
Old 05-15-2013, 09:33 PM
truetone36's Avatar
truetone36 truetone36 is offline
electronics packrat
 
Join Date: Jan 2006
Location: Trumann, AR.
Posts: 942
Quote:
Originally Posted by zenithfan1 View Post
I may be able to help with those knobs, I'll let you know if I find them.
Thanks
__________________
Dumont-First with the finest in television.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:53 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.