![]() |
|
#1
|
||||
|
||||
|
Help identifying a bubbling capacitor!
Okay, I am finishing the Magnavox phonograph,
and happened to see two of these bubbled in the amp. Are they ceramic capacitors? Resistors? The only numbers marked are: an R at the top with three lines on the left of the R, .005 M Z5u Anyone know what I should replace these with? Thanks! Magnavox300 |
|
#2
|
||||
|
||||
|
That looks to be a ceramic capacitor. It's small enough though where I'd just go with a silver mica of the same or higher voltage rating just to be safe.
|
|
#3
|
|||
|
|||
|
They are disc ceramic capacitors, .005 microfarad with 20% tolerance and sloppy temperature coefficient. Probably just used as bypass, and nearly any ceramic will work fine. Probably best to stick with 500V rating. They should cost a dime or so.
Having said that, I suspect the ones you have are still good. |
|
#4
|
||||
|
||||
|
Ditto, ceramics seem to last forever. That bubble might even be how the original coating ended up, not a trouble spot.
__________________
Evolution... |
![]() |
|
|