New to forum

[Gunslinger]

Just want to say hello. I'm a former TV tech that worked on many RCA and zenith sets from the 1960's thru 1999. I have many RCA and Zenith parts left if someone needs something. I threw all my modules out 5 yrs ago but have semiconductors for Zenith and RCA.

[bgadow]

Welcome, Gunslinger! Great to have as many sources as possible.

[Tony V]

Welcome to VK!

[old_coot88]

Howdy Gunslinger. Good to hear from another oldtimer.. er, middle age timer.
Bill(oc)

[Gunslinger]

thanks for the welcomes. I also have RCA/Zenth knobs, Zenith pots also and convergence repair parts.

[radiotvnut]

Welcome! Would you happen to have a remote for a '78 Zenith system 3? It's a battery operated ultrasonic remote with buttons for power, channel up, channel down, volume up, volume down, zoom, and mute.

[DaveWM]

I could use the convergence board coils, mine are crystalizing...

going to try the dental floss approch and see how that works out.

[Gunslinger]

will check tomorrow morning. Not too sure of the coils. Have to potiometers. I probably threw the remotes away a few yrs. ago.

[Gunslinger]

Don't have convergence coils. Do have convergence pots. As far as remot goes, threw them away a few years ago. I do have a Zenith 2 button tuning fork type in prestine condition. Has on-off/volume and channel change functions.

Also have a few PTS rebuilt tuners; mechanical type krk232/4 la199 and a few others. Have both RCA and Zenith knobs. Zenith varactor tuning board pots (the small white ones), Zenith high voltage hold down varistors (63-9068), Zenith vertical height pots (63-9115) a few Zenith system III/chromacolor II over ride switches (square push button type)

have alot more RCA parts

[DaveWM]

pm sent about the two button remote

[radiotvnut]

Originally Posted by Gunslinger

Don't have convergence coils. Do have convergence pots. As far as remot goes, threw them away a few years ago. I do have a Zenith 2 button tuning fork type in prestine condition. Has on-off/volume and channel change functions.

Also have a few PTS rebuilt tuners; mechanical type krk232/4 la199 and a few others. Have both RCA and Zenith knobs. Zenith varactor tuning board pots (the small white ones), Zenith high voltage hold down varistors (63-9068), Zenith vertical height pots (63-9115) a few Zenith system III/chromacolor II over ride switches (square push button type)

have alot more RCA parts

Thanks anyway for looking for the remote. I'm sure the correct one will turn up one day. I do have a 19" '74 Zenith 19" 4-tube hybrid that needs channel knobs. Right now, it's buried in my shop and was actually a set that I planned on using for parts; but, a better looking example has not come along, yet. So, I will get the part number for the knobs and see if you happen to have them. It's the basic entry level set with no dial light.

[Gunslinger]

Hey all,
I don't want to get off on the wrong foot. I posted a couple of times with stuff in inventory and salable items. I did not see that there is a classified section. Please forgive me if I affended anyone...no intention meant. I will try to behave

[DaveWM]

any luck on that pic?

[Gunslinger]

how does one upload a pic on this site?

[DaveWM]

when posting look down and you will see additional options, select manage attachements, from there you can browse your files, upload and submit