Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #16  
Old 02-10-2011, 02:39 PM
sampson159's Avatar
sampson159 sampson159 is offline
sampson159
 
Join Date: Sep 2007
Location: columbus,ohio
Posts: 2,170
i guess you didnt learn from your last foray.go ahead and get it.you will save me a ride to canton and i ll just take it from you.it happened before,remember?
Reply With Quote
  #17  
Old 02-10-2011, 02:52 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
It's interesting to me why there are so few listings on eBay for television sets and radios/stereos in the Cleveland area. There seem to be listings every day for sets located elsewhere in Ohio, but those for sets in cities northeast of Akron (including Cleveland and its suburbs) are few and far between. I bet if eBay had been around in the '70s-'80s there would have been lots of listings for TVs in this area, as the local TV shop (East End TV and Appliance, formerly of suburban Wickliffe and later Mentor, now probably out of business) specialized in Zenith radios, TV and hi-fi gear. I also used to see quite a few older Zenith televisions on the curbs in my old neighborhood, one of which, a Zenith K2739 VHF-only console from 1963, I found and completely retubed in 1969, and another, a Zenith SC300 19" portable, that lasted me a year (no repairs) until the horizontal output tube went gassy and threw the keyed AGC system out of whack, were two of my favorite sets.

Now, however, 42 years later, in the area in which I live today, I see few if any TVs of any make on the curbs or treelawns, not even flat panels. I would think as cheaply made as some of the off-brand FPs are, I'd be finding quite a few such sets with chassis faults or even smashed screens, the latter occurring when the TV either falls or is pushed off of its stand or is intentionally destroyed in a fit of temper. (I bet that happens not infrequently during football season.) However, I have yet to see even one FP anywhere on the curbs in my small town (population 3180). I know there are FPs here, as I have seen them in houses as I walk along the main street of town, but my goodness -- when are these sets going to fail? It seems that, more than two years after the DTV transition, most of the FPs in this town are still working, but I couldn't tell you how long they have been in use.

I don't believe that a flat panel TV will last anywhere near 20 years, unless it's one of Panasonic's Viera line of FPs; the displays in these sets are all but guaranteed to last at least that long, based on eight hours a day of use. I only use my RCA CTC185 CRT set perhaps three or four hours a day (give or take), which probably, even likely, accounts for why the set is still working flawlessly today, 11 years after I purchased it. But as I said, except for Panasonic's Viera line, I would never expect any other flat-panel to last anywhere near that long, let alone two decades or more.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 02-10-2011 at 03:01 PM.
Reply With Quote
  #18  
Old 02-10-2011, 03:22 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I don't pay attention to the item location for many of the TV's on ebay. I think the reason we don't see more TV's, console stereo's, and console radio's is because of their size and the difficulties involved with shipping such units. Unless it's a very small TV (12" or smaller), you are pretty much limited to dealing with someone who happens to be close enough to pick up the set in person. I'd never have a TV over 12" shipped to me. The reasons are the high cost involved and the fact that the TV would probably be destroyed in shipment. I've got a '53 21" Zenith that was a gift from a fellow VK'er and this set was the victim of a poor packing job (before I got it). As a result, the CRT neck was broken off. Considering how poorly it was packed, it's a wonder the set wasn't destroyed.
Reply With Quote
  #19  
Old 02-17-2011, 12:44 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by radiotvnut View Post
I've got a '53 21" Zenith that was a gift from a fellow VK'er and this set was the victim of a poor packing job (before I got it). As a result, the CRT neck was broken off. Considering how poorly it was packed, it's a wonder the set wasn't destroyed.
Did you ever get that set working? If the only problem with it is the broken CRT, a replacement should let you go ahead with any other repairs the set might need, including recapping. Those older Zeniths are excellent televisions when they are working as they should. I had a Zenith K2739 VHF-only 23" b&w set in the late '60s, trash-day find, that needed only a set of new tubes to get it working again. That was one of the best TVs I ever had; great picture and excellent sound (6BN6 gated-beam discriminator, 6x9 oval speaker and a tone control but, amazingly, no phonograph input; I would think with an audio stage such as this set had, it would have been equipped with such an input jack).

I have a Zenith MJ1035 stereo FM radio that was also a present from an AK member. The volume and tone control pots were very loose on the chassis (but the radio still worked); however, I had the chassis in and out of the cabinet so often to reseat the tone control (on which the AC power switch is mounted) and volume pot in their mounting holes that the latter became intermittent and finally quit. I emailed the person I got the set from and was told that the radio had been the victim of very rough handling by UPS between his house (near Phoenix, Arizona) and my apartment near Cleveland; this likely accounts for the broken control mountings.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #20  
Old 02-20-2011, 11:48 AM
sampson159's Avatar
sampson159 sampson159 is offline
sampson159
 
Join Date: Sep 2007
Location: columbus,ohio
Posts: 2,170
well i got it home last night.this is a metal cabinet unit that was installed in a wood cabinet with folding doors on the front.remote with the vertical chassis and a 23vdmp22 crt.i have never seen that crt in a set.looks like a sylvania rebuild?set works well with a very fine picture.the tuner needs some work as it drifts.vertical takes a little while to fill out the screen but after 5 minutes it works fine.i may remove the set from the cabinet and use it.cabinet is very nice with a speaker mounted on the left hand side.not sure what is was originally but its ornate and heavy.a metal cabinet zenith was a set on my want list for many years.pics dont do this set justice!

p s_just inserted pictures of cabinet.the metal cabinet fit the opening perfectly.looks like a factory installation.very nice and neat.i will take the set out.if anyone wants a beautiful cabinet with folding door,let me know.i will measure opening and post later
Attached Images
File Type: jpg 0220011324a.jpg (66.7 KB, 18 views)
File Type: jpg 0220011327.jpg (88.1 KB, 13 views)
File Type: jpg 0220011328.jpg (94.5 KB, 16 views)
File Type: jpg IMG950410.jpg (73.3 KB, 16 views)
File Type: jpg IMG950409.jpg (67.6 KB, 12 views)

Last edited by sampson159; 02-21-2011 at 10:26 AM.
Reply With Quote
Audiokarma
  #21  
Old 02-20-2011, 03:53 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by AUdubon5425 View Post
...and a particleboard cabinet. I pulled a CRT out of that exact model on the side of the road a year or so ago.

My '72/'73 Zenith Segovia console has a high-quality PLASTIC cabinet. Yep, all plastic.
All plastic? In a console? Hmmm. The console cabinet itself should be some sort of wood, unless the Segovia was one of Zenith's very low-end color sets. However, this seems well out of character for Zenith, even in the '70s; I didn't expect them to start putting their sets into all plastic cabinets until the '80s. I had two 13" Zenith portables, one 1979 (may have been made for the 1980 model year) and the other 1982, that were in all plastic cabinets, although I think Zenith was trying to make the 1982 model look more classy than the '79 ones as the '82 model, at least the one I had, had non-wood sides and top and a fake wood grain on the large control door over the channel presets (this set had the 18-position one-knob electronic tuning system, which may have been one of the first used in small Zenith portables as the words "electronic tuning" appeared on the channel display window, above the window itself). My '79 Zenith was in a black and silver plastic cabinet, the silver being used as trim around the speaker grille, the Zenith nameplate (black lettering against a silver background), and, IIRC, a silver trim strip across the width of the set at the base as well as around the top of the cabinet.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 02-20-2011 at 04:17 PM.
Reply With Quote
  #22  
Old 02-20-2011, 04:16 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by sampson159 View Post
well i got it home last night.this is a metal cabinet unit that was installed in a wood cabinet with folding doors on the front.remote with the vertical chassis and a 23vdmp22 crt.i have never seen that crt in a set.looks like a sylvania rebuild?set works well with a very fine picture.the tuner needs some work as it drifts.vertical takes a little while to fill out the screen but after 5 minutes it works fine.i may remove the set from the cabinet and use it.cabinet is very nice with a speaker mounted on the left hand side.not sure what is was originally but its ornate and heavy.a metal cabinet zenith was a set on my want list for many years.pics dont do this set justice!
I had relatives who did something like that to RCA color consoles when the TVs quit. They just took the old set's chassis out of the cabinet, built a nice wood frame around the opening, and put new (at the time, mid-'70s-eighties) 19" color sets in their place. One TV got a 19" Emerson replacement set, the other a Zenith 19-incher, but neither had remote control. The sets looked almost indistinguishable from factory jobs -- the work was that good, IMHO. The set with the Emerson replacement TV had been modified so the new portable's audio played through the old set's original speakers; I'm not sure about the one with the 19" Zenith replacement. I think the latter was simply put into the opening vacated by the old RCA chassis, the wood frame put around it to take up the extra space, and the TV itself played through its own speaker, with the stereo components in both sets playing through the original speakers as before the modifications. I especially liked the console with the Zenith replacement set because I like Zenith TVs (pre-GS) and stereo gear, but the RCA console with the Emerson set looked very good in its own right.
I only wish I had pictures of these sets; written descriptions don't do them justice, as the transplant jobs turned out so well. Especially with the RCA/Zenith transplant, as I said, the result was a console anyone would be hard-pressed to distinguish from a factory-built one.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #23  
Old 02-20-2011, 09:32 PM
AUdubon5425's Avatar
AUdubon5425 AUdubon5425 is offline
VideoKarma Member
 
Join Date: Aug 2008
Location: Picayune, Miss.
Posts: 1,769
Quote:
Originally Posted by Jeffhs View Post
All plastic? In a console? Hmmm. The console cabinet itself should be some sort of wood, unless the Segovia was one of Zenith's very low-end color sets. However, this seems well out of character for Zenith, even in the '70s...
Jeff, the top is a composite hardboard. The base, sides, around the crt - all plastic. The Segovia changed style a bit for '74 and got a set of doors, but it's ad copy says it all:

Genuine wood veneers on top. Decorative front, ends, doors and base of durable, richly-grained simulated wood material.
__________________
AUdubon5425 Youtube Channel
Reply With Quote
  #24  
Old 02-20-2011, 11:52 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by AUdubon5425 View Post
Jeff, the top is a composite hardboard. The base, sides, around the crt - all plastic. The Segovia changed style a bit for '74 and got a set of doors, but it's ad copy says it all:

Genuine wood veneers on top. Decorative front, ends, doors and base of durable, richly-grained simulated wood material.
Kinda' like the Avanti series. Those sets had all plastic cabinets too, with simulated rosewood tops; Zenith used this basic cabinet for the original knob-tuned Avanti as well as the later remote model. This was either at or very near the end of the wood-console era, although Zenith continued to make consoles with cabinets like the Segovia until the very early 1990s. I remember seeing an ad somewhere for these sets when they were first introduced, and a picture of the inside of the cabinet which I will never forget. The PC board "chassis" was sitting in the center of the cabinet, with loads of empty space around it; hey, one could put a stereo system and a couple of speakers in there, and probably still have some room left over.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 02-21-2011 at 12:06 AM.
Reply With Quote
  #25  
Old 02-21-2011, 07:22 AM
AUdubon5425's Avatar
AUdubon5425 AUdubon5425 is offline
VideoKarma Member
 
Join Date: Aug 2008
Location: Picayune, Miss.
Posts: 1,769
I suspect even plastic became too luxurious by 1990. I had two bottom-of-the-line Sentry-2 consoles ('90 & '92) that were totally thin particleboard and lots of empty real estate inside. Light enough that I loaded them into the van by myself when they took their final journey.
Reply With Quote
Audiokarma
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.